 |
|
EXHAUSTO
Pizza Oven Fans
& Kitchen Exhaust
GSV 009-016 |
Exhausto GSV fan for installation at the chimney termination
point, vertically or for side-wall venting. Assures a negative
pressure in the entire chimney or stack system.
Discharges vertically (horizontally if side-wall venting) at
a high velocity.
The fan housing is hinged and the top can be opened for easy
service and access to stack. |
|
EXHAUSTO's grease fan can be used with wood and gas
fired BBQ’s, pizza ovens, fireplaces and more.
Quick Facts:
- QUIET OPERATION
- Virtually invisible from the ground
- Lowest operating cost
- Cast aluminum housing
- Vitrually maintenance free
The GSV Fan is mounted on top of the chimney. It pulls exhaust and/or
grease from pizza ovens, BBQ’s, fireplaces, etc,
It is easy to install and virtually maintenance free.
With the variable speed feature, EXHAUSTO fans are designed to be
part of present and future energy efficient kitchen ventilation systems.
This feature also allows our fan to operate continuously at temperatures
of up to 575 ° F (300 ° C) |
Common Accessories
|
EXHAUSTO
Fan Speed Control
FSC
Included with RS Series Fans |
 |
|
EXHAUSTO Fan Speed Control FSC is used in conjunction with all single-phased
EXHAUSTO chimney fans. The fan speed control is specially engineered to
provide variable speed control of split-capacitor motors. This control is
accomplished by reducing the line voltage to the motor thereby using only
the energy required to maintain the desired volume of air flow (fan speed).
Notice: The RSV 400 and 450 are 3x200-240VAC and cannot be controlled
with this kind of fan speed control |
| |
Exhausto SCA
Steel Chimney Adapter
For metal flue pipe
installation
 |
 |
Material
The steel chimney adapter is made of 16GA, 304 stainless
steel.
Warranty
2-year factory warranty
Downloadable PDF
Steel Chimney Adapter |
EXHAUSTO
Steel Chimney Adapter is used when installing the chimney fan on the
top of a single, double or triple wall steel chimney.
The adapter is designed to
slide into the steel chimney for a tight fit. The outer diameter of
the collar is 1/8" smaller than the inner diameter of the steel
chimney and has a 5" deep collar. |
|
Material |
Motor |
Standard Equipment |
Optional Equipment |
Exhausto GSV housing is made of cast aluminum with a thickness of 3/16"
and is corrosion resistant. One coat of grey hammer-paint finish is applied.
Axial vanes in stainless steel, dynamically and statically
balanced to assure low noise level and vibration-free operation. |
Split capacitor, totally enclosed. Class H insulated, IP54
Protection Class. Sealed ball bearings. Variable Speed.
Thermal overload protection. |
2"x4" or 4"x4" junction box with cover and conduit
Bird Screen
|
5Amp or 8Amp Fan Speed Control Gasket - Fan Proving Switch
|
|
Listings |
Approvals |
Warranty |
ETL listing #E109205550D
UL378 - Draft Equipment
UL762 - Standard for Power Roof Ventilators for
Restaurant Exhaust Appliances.
ULC-S645-93 - Standard for Power Roof
Ventilators and Commercial and Institutional
Kitchen Exhaust Systems. |
CE Compliant
City of New York Department of Building
City of Los Angeles
The Commonwealth of Massachusetts (G1-1295-29) |
2-year factory warranty on the entire Exhausto GSV fan.
10-year warranty against corrosion perforation.
Manufactured at ISO9001 certified plant.
|
Exhausto Fans...the
ultimate draft solution.
E-Mail & Prices
Go To Exhausto Fans :
 |
 |
 |
 |
 |
Residential
Chimney Fans |
RSIF In Line
Draft Inducer |
Pizza Oven Fans |
Grease Fans |
Box Ventilators |
|
